Computherm KonvekPRO Operating Instructions Manual page 3

on the signal received from the room thermostat,
KonvekPRO
stops heating the tube thermostat of the
gas heater which cools down (for 3-6 minutes) below
the temperature value set by the regulating knob of
the gas heater so the gas heater switches on and
starts to heat. When the temperature in the room
reaches the value set on the room thermostat then
KonvekPRO
the room thermostat sends a signal to
to warm up (for 1-1.5 minutes) the tube thermostat
above the value set by the regulating knob of the
gas heater and the gas heater stops heating.
KonvekPRO
Using an automatic programmed
heating system can be easily established in a
room heated by gas heater. Besides, this product
enables you to control your gas heaters remotely by
using a Wi-Fi thermostat. With this product you can
save considerable energy in addition to improved
comfort.
KonvekPRO
We have designed for gas heaters only.
In Hungary gas heaters manufactured by FÉG
- 3 -