Printing Images Directly Using A Pictbridge Compliant Printer - Sony DSC-N2 Cyber-shot&reg Handbook

Printing images directly using a PictBridge
compliant printer
Even if you do not have a computer, you
can print images shot using your camera by
connecting the camera directly to a
PictBridge compliant printer.
• "PictBridge" is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
In single-image mode
You can print a single image on a printing
sheet.
In index mode
You can print several images at a reduced
size on a printing sheet. You can print a set
of either the same images (1) or different
images (2).
1
• An index print function may not be provided
depending on the printer.
• The quantity of images that can be printed as an
index image differ depending on the printer.
• You cannot print movies or the images saved in
the Album.
• If the indicator flashes on the screen of the
camera for about five seconds (error
notification), check the connected printer.
2
Stage 1: Preparing the camera
Prepare the camera to connect it to the
printer with the cable for multi-use
terminal. When connecting the camera to a
printer that is recognized when [USB
Connect] is set to [Auto], Stage 1 is
unnecessary.
Index button
• It is recommended to use a fully charged battery
pack or an AC Adaptor (not supplied) to prevent
the power from turning off partway through
printing.
1
Touch [MENU] to display the
menu.
2
Touch V to display
3
Touch [USB Connect] in [
(Setup 3).
4
Touch [PictBridge], then
The USB mode is set.
(on-screen
key) button
(Setup).
]
3
.
99