Printing images directly using a PictBridge
Even if you do not have a computer, you
can print images shot using your camera by
connecting the camera directly to a
PictBridge compliant printer.
• "PictBridge" is based on the CIPA standard.
(CIPA: Camera & Imaging Products
In single-image mode
You can print a single image on a printing
In index mode
You can print several images at a reduced
size on a printing sheet. You can print a set
of either the same images (1) or different
• An index print function may not be provided
depending on the printer.
• The quantity of images that can be printed as an
index image differ depending on the printer.
• You cannot print movies.
• If the
indicator flashes on the screen of the
camera for about five seconds (error
notification), check the connected printer.
Stage 1: Preparing the camera
Prepare the camera to connect it to the
printer with the USB cable. When
connecting the camera to a printer that is
recognized when [USB Connect] is set to
[Auto], Stage 1 is unnecessary.
• It is recommended to use batteries with enough
capacity or an AC Adaptor (not supplied) to
prevent the power from turning off partway
Press MENU to display the menu.
Press B on the control button to
] (Setup 2) with V, then
select [USB Connect] with v/V/B.
Select [PictBridge] with B/v, then
The USB mode is set.