Troubleshooting
Cannot print images with the date inserted.
If you print out images using "Picture Motion Browser", the images can be printed with date
•
inserted.
This camera does not have a feature for superimposing dates on images. However, because the
•
images shot with the camera include information on the recording date, you can print images
with the date superimposed if the printer or the software can recognize Exif information. For
compatibility with Exif information, consult the manufacturer of the printer or the software.
When you print images at a shop, images can be printed with the date inserted if you ask them
•
to do so.
PictBridge compliant printer
A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
•
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] in the
•
Disconnect and connect the cable for multi-use terminal again. If an error message is
•
indicated on the printer, refer to the operating instructions supplied with the printer.
Nothing appears on the camera screen when a USB connection is made.
The switch on the cable for multi-use terminal is set to "TV". Set to "CAMERA" (page 100).
•
Cannot print images.
Check that the camera and the printer are properly connected using the cable for multi-use
•
terminal.
Turn on the printer. For further information, refer to the operating instructions supplied with
•
the printer.
If you select [Exit] during printing, images may not be printed. Disconnect and connect the
•
cable for multi-use terminal again. If you still cannot print your images, disconnect the cable
for multi-use terminal, turn the printer off and then on, then connect the cable for multi-use
terminal again.
You cannot print movies or the images saved in the Album.
•
Images shot using cameras other than this camera or images modified with a computer may
•
not be printed.
Printing is canceled.
You disconnected the cable for multi-use terminal before the
•
mark disappears.
114
(Setup) menu (page 75).
(PictBridge Connecting)