Focus): Changing The Focus Method - Sony DSC-N2 Cyber-shot&reg Handbook

Digital still camera
Table of Contents

Advertisement

Selecting the desired camera function
• For details on the exposure, see page 8.
• The compensation value can be set in 1/3EV increments.
• If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure
adjustment may not be effective.
z Adjusting EV (Exposure Value) by displaying a histogram
A Number of pixels
B Brightness
• The histogram also appears in the following cases, but you cannot adjust the exposure.
– When
(Camera) is set to [Auto] or [Manual]
– When playing back a single image

9 (Focus): Changing the focus method

You can change the focus method. Use the menu when it is difficult to get the proper focus in
auto focus mode.
1 Press
(on-screen key).
2 Set
(Camera) to a setting other than [Auto], then touch
3 Touch 9 (Focus).
4 Touch the desired option.
32
A
B
Dark
Bright
A histogram is a graph showing the brightness of
an image. Press
repeatedly to display the histogram inside the
screen. The graph display indicates a bright
image when skewed to the right side, and a dark
image when skewed to the left side. Select
[Program] or one of the scene selection modes for
(Camera) and adjust EV while checking the
exposure with the histogram.
.
(Screen display switch)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cyber-shot dsc-n2

Table of Contents