(Interval): Selecting The Frame Interval In The [Multi Burst] Mode; (Flash Level): Adjusting The Amount Of Flash Light - Sony DSC-N2 Cyber-shot&reg Handbook

Shooting menu
On the [Multi Burst]
• You can successively play back images shot in the Multi Burst mode using the following procedures:
– To pause/resume: Touch X.
– To play back frame-by-frame: Touch c/C in pause mode. Touch B to resume playback in series.
• You cannot use the following functions in the Multi Burst mode:
– Smart zoom
– Dividing a series of images shot in the Multi Burst mode
– Extracting or deleting a frame in a series of images shot in the Multi Burst mode
– Setting the frame interval to a mode other than [1/30] when
• When playing back a series of images shot in the Multi Burst mode using a computer or a camera not
equipped with the Multi Burst function, the image is displayed as a single image with 16 frames.
• You may not be able to shoot images in the Multi Burst mode depending on the Scene mode (page 30).
BRK (Bracket Step): Shifting the EV in the [Exp Brktg] mode
Records a series of three images with the exposure values automatically shifted.
±1.0EV
±0.7EV
±0.3EV
• BRK (Bracket Step) is not displayed in some Scene modes.

(Interval): Selecting the frame interval in the [Multi Burst] mode

Selects the frame interval in the [Multi Burst] mode (page 50).
1/30 (1/30")
1/15 (1/15")
1/7.5 (1/7.5")
• M (Interval) is not displayed in some Scene modes.

(Flash Level): Adjusting the amount of flash light

Adjusts the amount of flash light.
+ ( +)
Normal
– ( –)
• To change flash mode, see page 23.
• You may not be able to set the Flash Level depending on the Scene mode (page 30).
52
For details on the operation 1 page 43
Shifts the exposure value by plus or minus 1.0EV.
Shifts the exposure value by plus or minus 0.7EV.
Shifts the exposure value by plus or minus 0.3EV.
• Select [Multi Burst] in [Mode] first, then set the desired frame
interval in [Interval]. When you select a function other than
[Multi Burst], this function is unavailable.
Toward +: Makes the flash level higher.
Toward –: Makes the flash level lower.
(Camera) is set to [Auto]