Sony DSC-N2 Cyber-shot&reg Handbook page 42

Painting on still images
To change the color of the line or stamp
Touch the color select button, a desired color, then
• The selected color is applied to both the line and stamp.
To make corrections
Touch , then rub the part you want to erase using the paint pen. Otherwise, touch
revert to the previous state (if you touch
• You can select the thickness of the eraser in the same way as you do for the pen, using the thickness select
button. The selected thickness is applied to both the line and eraser.
Erasing all painting
1 Touch .
"Clear All" appears.
2 Touch [OK].
All painting will disappear from the image.
Touch [Cancel] to cancel the operation.
To save the painting
1 Touch
"Save" appears.
2 Touch [OK].
The painted image is recorded in the recording folder as the newest file.
Touch [Cancel] to cancel the operation.
• The image is saved in [VGA(E-Mail)] image size and [Fine] picture quality.
To exit paint mode
1 Touch .
"Exit" appears.
2 Touch [OK].
Touch [Cancel] to cancel the operation.
• If you touch
touching /
42
(or ).
before saving the image, the painting is abandoned. Be sure to save the painting by
if you intend to save it.
.
again, it returns to the latest state).
to