Volvo Penta D1 Series Operator's Manual page 29

4000
2000
P0002420
47711262 01-2019 © AB VOLVO PENTA
Graph, button 4
This screen displays operational information in the
form of graphs. Depress button 4 repeatedly to select
the information to be displayed. To set the time interval,
refer to Configuration menu.
If contact with the system is lost, a straight line will
proceed across the screen.
Configuration menu
Open the Configuration menu by holding down button
5 for at least 3 seconds. In this screen it is possible to
retrieve System information, enter various display
settings, calibrate depth compensation and speed and
retrieve other system information.
Engine ignition must be switched on when changing
display settings or calibrating functions.
Navigate through the menu using the up and down
arrows, and select using the right arrow.
System Information
This screen shows the same information as that shown
in the tachometer display; refer to Instruments and
Controls, page 23 for further information.
Alarm
When the system detects a fault, the display
automatically switches to the System Information
screen. For further information, refer to Fault
handling, page 41.
Instruments and Controls
27