Evc System Display - Volvo Penta D1 Series Operator's Manual

1 2
P0001168
ENGINE HOURS
HOURS
P0003010
47711262 01-2019 © AB VOLVO PENTA
G H
3 4 5
0

EVC system display

It is possible to present several windows with different
operational information in the EVC system display. The
various screens are selected using the instrument
buttons.
Before the display is put to use certain settings must
be entered in the configuration menu; refer to
Configuration menu.
It is also possible to bring up a menu identical to that
shown in the tachometer display by navigating to
System information in the Configuration menu, or by
depressing button 2; refer to Multi, button 2.
A self-test is performed at start; the display will emit a
constant audible signal if a fault is detected. The
display will continue to function, but may behave in
unexpected ways.
Only installed functions are shown in the display.
Screens
Depress any of the buttons 1 to 4 to bring up the
function menu for the buttons on the lower part of the
display.
Buttons 1, 2 and 4 provide different screens.
Button 1 – Engine
Button 2 – Multi
Button 4 – Graph
Use button 5 to adjust contrast and to access the
configuration menu for display settings; refer to
Configuration menu.
Exit the menu by waiting a few seconds or by
depressing button 5 (EXIT).
Contrast
The display has five contrast settings. Depress button
5 (far right) and change the contrast by depressing +
(button 4) or – (button 3).
Store the setting by depressing EXIT (button 5).
Instruments and Controls
25