Linkage Menu - FUTABA T14SG Software Update Manual

④ If you want to show two sensors on your
Telemetry screen, select 2 in "Display".
Then move down to the Sensor to select
which other item is shown.
When using a sensor that has two or more
functions, you will want to scroll to select
which will be displayed. (ALTITUDE,VARIO,
etc.)
⑤ I f y o u w a n t t o s h o w t h r e e s e n s o r s
o n y o u r Te l e m e t r y s c r e e n , s e l e c t 3
in "Display". Then move down to the
Sensor to select which other item is
shown.
⑥ To SENSOR " ----------" selection will
reduce a display item.
1 3
2
2. Telemetry Speech function
■ There is not only a software update, but also a
■ There are two languages available in the
■ The language chosen for the Speech data will
■ The Speech function can only be used with
■ You will need to purchase headphones or
● T E L E M . S E T. m e n u i s a d d e d t o t h e
1
2
- 2 -
Speech update that must be done.
Speech data, English and German.
affect only the Speech function. It will not
change the language used in the transmitter's
text display.
headphones plugged into the phone jack.
earphones with a 3.5plug.
Earphone plug

LINKAGE MENU.

The speech language installed is
indicated. When the speech data is
not installed, "----------" is displayed.
The version No. of the speech data
file is indicated. When the speech
data is not installed, nothing is
displayed.
The interval of speech can be set.
The setting range is from 0 [Sec] to
30 [Sec].