Advertisement
Switching Panel
Input to
ActivInspire,
AppleTV or
document camera
FRASER STANDARD INPUTS
HDMI2
- APPLETV
HDMI4
- MACBOOK / ACTIVEINSPIRE
HDMI3
- UNUSED [left-side input/DVD]
VGA
- DOCUMENT CAMERA
OPS
- BUILT-IN PANEL COMPUTER
ActivInspire
(Note: both cables-HDMI
and USB--must be
connected to your
Macbook with the latest
ActivInspire software
installed)
AppleTV
(Move wirelessly around
your room to Airplay to
your Macbook screen)
Document
Camera
(Show manipulatives,
books, paper documents
on the ActivPanel)
Promethean 75", 4K integrated flat panels
1.! Using the row of buttons on the bottom right
corner of the front of the ActivPanel.
2.! Press the source button. See the picture below.
It is the button labeled below with the yellow
circle.
When the menu appears on screen, tap the input
that corresponds to the source you'd like to
display. A green dot will appear beside sources
where a "powered" input source.
1.! Using the row of buttons on the bottom right
corner of the front of the ActivPanel, select the
input for your Macbook/ActivInspire.
2.! Now that you have switched to your
device, look for the ActivInspire Icon
and launch the software. Enjoy the
many benefits of this outstanding software.
1.! Using the row of buttons on the bottom right
corner of the front of the ActivPanel, select the
input for your Apple TV.
2.! Now that you have switched to your
device, you will be able to Airplay your
screen to the ActivPanel.
Remember: the touch features of the panel
cannot control your Macbook over Airplay.
1.! Using the row of buttons on the bottom right
corner of the front of the ActivPanel, select the
input for your document camera (VGA or
HDMI).
2.! Now that you have switched to your
device, you may use the functions of your
document camera.
Fraser Public Schools,
tl rev. Aug. 15, 2018
Advertisement
