Shooting Settings - Shooting Settings 2; Auto Orientation; Auto Review - Sony Cyber-shot DSC-W300 Handbook

Settings
Shooting Settings — Shooting Settings 2
The default settings are marked with

Auto Orientation

When the camera is rotated to shoot a portrait (vertical) image, the camera records its position
change and displays the image in the portrait position.
On
Off
• Black is displayed to the left and right of vertical orientation images.
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
correctly. If an image is not recorded in the correct orientation, you can rotate the image, following the
procedure on page 78.
• When (Underwater) mode is selected in the Scene Selection mode, you cannot use [Auto
Orientation].

Auto Review

Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
On
Off
• If you press the shutter button halfway down, the recorded image display disappears and you can
immediately shoot the next image.
• You cannot use Auto Review when:
– (Extra High Sensitivity) mode is selected in the Scene Selection mode.
– During burst/bracket shooting
– When [Auto] or [Advanced] is selected in [Scene Recognition].
92
For details on the operation 1 page 80
.
Records the image with the correct orientation.
Does not use Auto Orientation.
Uses the Auto Review.
Does not use Auto Review.