Troubleshooting
Cannot shoot in Smile Shutter mode.
Press the shutter button all the way down.
•
No image is shot unless a smile is detected (page 32).
•
[Smile demo mode] is set to [On]. Set [Smile demo mode] to [Off] (page 86).
•
This subject is not visible on the screen.
The camera is set to the playback mode. Press the
•
recording mode (page 36).
Anti-blur function does not work.
The anti-blur function does not work when
•
The anti-blur function may not work properly when shooting night scenes.
•
Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.
•
Confirm that the [Conversion Lens] setting is correct (page 91).
•
Recording takes a long time.
The NR slow shutter function is activated (page 17). This is not a malfunction.
•
[DRO] is set to [DRO plus] (page 63). This is not a malfunction.
•
The image is out of focus.
The subject is too close. Make sure to position the lens farther away from the subject than the
•
shortest shooting distance, approximately 5 cm (2 inches) (W)/34 cm (1 foot 1 1/2 inches) (T)
(from the front of the lens), when shooting (page 25).
(Landscape) mode,
•
Selection mode when shooting still images.
The Semi manual function is selected. Select the auto focus mode (page 58).
•
Confirm that the [Conversion Lens] setting is correct (page 91).
•
Refer to "If the subject is out of focus" on page 59.
•
Zoom does not work.
You cannot use the Smart zoom depending on the image size (page 90).
•
When
•
the Scene Selection mode, the Smart zoom does not function.
•
You cannot use the Digital Zoom when shooting movies.
You cannot change the zoom scale when:
•
The Smile Shutter is in standby (page 32).
–
Shooting movies.
–
Confirm that the [Conversion Lens] setting is correct (page 91).
•
122
(Twilight) mode or
(Extra High Sensitivity) mode or
(Playback) button to change to the
appears on the display.
(Fireworks) mode is selected in the Scene
(Extra High-speed Burst) mode is selected in