Sony Cyber-shot DSC-W300 Handbook page 54

Shooting menu
• The recording interval is the same as the Burst mode. The recording interval may be longer, depending on
the scene conditions.
• If the subject is too bright or too dark, you may not be able to shoot properly with the selected bracket step
value.
Scene Recognition: Determining the scene to be shot and taking the shot
The camera automatically detects shooting conditions, such as backlight or an night scene,
and then takes the shot.
(Off)
(Auto)
(Advanced)
About Scenes that Are Recognized
The following scenes can be recognized. The camera identifies the optimum scene and
displays each mark.
When the shutter is pressed halfway down while a mark is displayed, the mark color turns
green and scene recognition is confirmed.
Twilight
Twilight Portrait
Twilight using a tripod
Backlight
Backlight Portrait
• Scene recognition does not function in the following situations:
– During burst shooting
– When using digital zoom
54
For details on the operation 1 page 46
Does not use the Scene Recognition.
The camera detects conditions such as backlight or a night
scene and takes the shot using the optimal settings.
If the camera does not recognize the scene, it shoots the
image just as if scene recognition was set to [Off].
The camera shoots one image without using the scene
recognition function and another image using scene
recognition. is displayed next to a scene recognition mark.
(A total of two shots)
If the camera does not recognize the scene, it only shoots one
image.
In this case, the image is shot just as if scene recognition was
set to [Off].
Current setting mark
Scene Recognition mark