Table of Contents
Advertisement
Figure 4-21 LCD panel [2/2]
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See figure "Cable
dressing".
•
Pay special attention not to damage the EMC foams.
Ensure that EMC foams are mounted correctly (one is
located above the LVDS connector on the display, between
the LCD display and the metal sub-frame).
Mechanical Instructions
7
G_16850_015.eps
110107
LC7.1A LA
4.
EN 17
Advertisement
Table of Contents
