Lcd tv with ambilight spectra and pixel precise hd 94 cm (37") full hd 1080p digital tv (3 pages)
Summary of Contents for Philips 32PFL7674H
Page 1
United Kingdom General No: 0800 331 6015 General National Rate No: 0870 911 0036 Україна 8-800-500-69-70 This information is correct at the time of press. For updated information, see www.philips.com/support. Model Serial www.philips.com/support €0.07 pro Minute €0.03 Per minuut/Par minute Местен...
Back connectors Side connectors Connect a computer Connect to a computer network (selected models only) Use a Conditional Access Module Assign a channel decoder Use Philips EasyLink Use a Kensington lock 8 Product information Supported display resolutions Multimedia Tuner/Reception/Transmission Remote control...
Page 4
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. • Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight.
Page 6
• When you disconnect the power cord, always pull the plug, never the cable. • Disconnect the TV from the power outlet and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable. Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time.
Page 7
You can find detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. This TV has features that contribute to energy-efficient use. This TV was awarded the European Ecolabel for its environmental qualities.
3 Your product Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers; register your product at www.philips.com/welcome. Product overview This section gives you an overview of commonly used controls and functions. Side controls and indicators POWER: Switches the product on or off.
Page 9
Universal control buttons (DVD/STB/ HTS) *Controls other devices such as a DVD player, set-top box or a home theatre system from Philips or other brands. c Colour buttons Selects tasks or options. (Home) Toggles the home menu on or off.
4 Use your product This section helps you perform basic operations (see ‘Use more of your product’ on page 14). Switch your TV on/off or to standby To switch on • If the front LED indicator is off, press POWER at the side of the TV. •...
Note • When you use a favourite list, you can only select those channels in the list. Switch channels with the channel grid The channel grid allows you to view all available channels in a grid format. Press OK. » The channel grid appears.
With the TV connected to the Internet, you can use Net TV to access videos, pictures, music, information, games and other online services. Note • Koninklijke Philips Electronics N.V. bears no responsibility for content provided by Net TV service providers. Access Net TV Note •...
Navigate Net TV Press: Navigation buttons to navigate Net TV • or web pages OK to view or select an item • BACK to go back to a previous page • • (Home) to exit Net TV and go back to the home menu Mark favourite Net TV pages You can mark Net TV pages or services as...
Page 14
Set Ambilight active mode Ambilight active mode allows you to set the speed at which Ambilight responds to on- screen images. Press and hold AMBILIGHT for at least three seconds. [Ambilight active mode] bar » appears. Press the Navigation buttons to move the slider towards [Relaxed] for smoother Ambilight responsiveness;...
5 Use more of your product Change language settings Note • Skip this step if your language settings are correct. When watching TV, press The home menu appears. » Press the Navigation buttons to select [Setup]. [Setup] menu appears. » Press the Navigation buttons to select [Installation] >...
Press the Navigation buttons to select a home menu item: [Watch TV]Switches back to the • aerial source if another source is selected. [Setup]Accesses menus that allow • you to change picture, sound and other TV settings. [Add new device]Adds new devices •...
Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually. Note • The flexibility to change settings is limited if the TV location is set to [Shop] mode. Set the TV location to [Home] mode to access all TV settings (see ‘Change TV preferences’...
Page 18
Use the picture and sound experience Use the [Picture and sound] experience bar to access frequently used picture and sound settings. Note • All picture settings are available via the [Picture]menu (see ‘Manually adjust picture settings’ on page 17). • All sound settings are available via the [Sound]menu (see ‘Adjust sound settings’...
Page 19
Settings assistant Smart settings Picture Contr Contr ontr Sound Brigh Brightness tness Featu Featu eatures Colour Installation Software update Sharpness Noise redu ction ction Tint Press the Navigation buttons and OK to select and adjust a picture setting. BACK to exit. Press The following picture settings can be configured.
Note • [Colour] and [Contrast] settings are also accessible via the [Picture and sound] experience bar (see ‘Use the picture and sound experience bar’ on page 17). Change picture format Press FORMAT. A list of picture formats appears. » Auto Auto format Supe...
Bass Smart Smart sett settings ings Pictu T rebl Sound Volu lume Feat Featu Features Featu Volum ume - V Visual isual sually im sual ly im ly im impair Insta nstallat llation Audio Audio lang language uage Softw are u update pdat Dual...
Press Navigation buttons and OK to select and adjust an Ambilight setting. Press BACK to exit. The following Ambilight settings can be configured: [Ambilight]Turns Ambilight on or off. • • [Ambilight active mode]Sets an Ambilight setting between relaxed and dynamic levels. This feature is only available when Ambilight [Colour] is set to [Active mode].
Page 23
Select teletext subpages A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number. Note • Enable cycling of subpages before selecting subpages (see ‘Access the teletext options menu’ on page 21). Press TELETEXT.
Create and use lists of favourite channels You can create lists of your preferred TV channels so that you can find those channels easily. Note • Digital radio stations can also be added to favourite lists, if supported. View only channels in a favourite list, or view all channels if a favourite list is currently selected.
Press the Navigation buttons to select the channel to reorder in the grid. A box appears around the selected » channel. Ned 2 N ed RTL 8 KetN KetN KetN KetN medy medy Euro Press the Navigation buttons to move the channel to the desired location in the grid.
Ned 2 RTL 8 KetN KetN Disco medy medy Euro Anim Press the Navigation buttons to select the channel to unhide. Press OPTIONS. The options menu appears. » Press the Navigation buttons to select [Unhide channel], then press OK. The channel is unhidden. »...
INFO to exit back to the original Press channel or press BACK to exit to the EPG menu. Use the EPG options menu Use the EPG options menu to set or clear reminders, change day and access other useful EPG options. Note •...
Use child and rating locks You can prevent your children from watching TV by locking the TV and using age ratings. Set or change the child lock code When watching TV, press The home menu appears. » Press the Navigation buttons to select [Setup].
Set parental ratings Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings higher than your child’s age. Note • Before you can set parental ratings, you have to enable the feature (see ‘Enable parental ratings’...
Press the Navigation buttons to select: • [On]Enables subtitles. [Off]Disables subtitles. • [On during mute]Displays subtitles • only when audio is muted. Press OK. » Subtitles are enabled or disabled. Press BACK to exit or press (Home) to go back to the home menu. Select a subtitle language on digital TV channels Note...
View photos, play music and watch video Caution • Philips is not responsible if your USB storage device is not supported nor is it responsible for damage or loss of data from use of this feature. Your TV is fitted with a USB connector that...
Watch a slideshow of your photos In the content browser, press the Navigation buttons to select a photo. Press or OK. A slideshow begins from the selected » image. Press: • to pause the slideshow. • or P +/- to go back or move forward to the next image.
The selected digital radio channel plays » through the TV speakers. Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability. Check the current software version When watching TV, press The home menu appears.
Press the Navigation buttons to select [Setup]. Press OK. [Setup] menu appears. » Press the Navigation buttons to select [Software update] > [Update now]. Press OK. » The update assistant starts. Follow the on-screen instructions to complete the update. Update software (digital broadcasts) (Only available in some countries) If available, your TV can receive software updates via digital broadcasts.
(selected models only) Control other devices such as a DVD player, a set-top box or a home theatre system from Philips or other brands. To return to TV mode from universal control, press TV. Use these keys to control the devices: •...
Page 36
STB: controls a digital receiver or satellite • receiver • HTS: controls a home theatre system or an amplifier. Setup universal remote control Before you use the TV remote control to control another device, setup the universal remote control mode. Note •...
6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and fine tune channels. Automatically install channels This section describes how to search and store channels automatically.
Access DVB-C and DVB-T channel networks This option appears only if your country supports DVB-C (Digital Video Broadcasting- Cable). If you have installed both DVB-C and DVB-T channels, you have to switch to the respective network to watch channels on that network.
Press: • Navigation buttons or Numeric buttons to manually enter the channel frequency. Navigation buttons to select • [Search next], then press OK to automatically search for the next channel. When the correct channel frequency is selected, press the Navigation buttons to select [Done].
Select Update channels Re-install channels to update your current Update channels channel list. Select Re- install channels to search arch and store all channels again. Press OK. Follow the on-screen instructions » to complete channel update. When the update is complete, [Done] is selected and a list of added channels is displayed.
Note • The connectivity diagrams provided in this section are examples only. A comprehensive interactive guide to help you connect your product is available at www.connectivityguide. philips.com. Back connectors AUDIO SPDIF AUDIO IN: LEFT / RIGHT HDMI 1 / DVI...
Page 42
b SPDIF OUT Digital audio output to home theatres and other digital audio systems. c AUDIO OUT L/R Analogue audio output to home theatres and other audio systems. AUDIO AUDIO d VGA Video input from a computer. e AUDIO IN Audio input from devices that require a separate audio connection, such as a computer.
g HDMI1/2/3 Digital audio and video input from high- definition digital devices such as Blu-ray players. Note • If connecting thick HDMI cables, use h TV ANTENNA Signal input from an antenna, cable or satellite. TV ANTENNA i NETWORK*This feature is availabe in selected models only.
a AUDIO IN L/R Audio input from analogue devices connected to VIDEO or S-VIDEO. b VIDEO Composite video input from analogue devices such as VCRs. c S-VIDEO Video input from analogue devices such as satellite receivers. Stereo audio output to headphones or earphones.
HDMI cable • DVI-HDMI cable (rear HDMI and • AUDIO IN) AUDIO IN: LEFT / RIGHT HDMI 1 / DVI HDMI 2 / DVI HDMI 3 / DVI DVI-HDMI cable (side HDMI and • AUDIO IN L/R) HDMI cable and HDMI-DVI adaptor •...
TV to a computer network. If necessary, read documentation accompanying network components. Philips is not responsible for lost, damaged or corrupt data. What you need • A network router (with DHCP enabled) •...
Page 47
accompanying your software to enable media sharing. Note • You do not need to complete this section to access Net TV. In Microsoft Windows Media Player Note • The instructions are applicable to both Microsoft Windows XP and Vista. Enable media sharing In Microsoft Windows, start Windows Media Player 11.
Page 48
Click OK. Add folders for media sharing In Windows Media Player, click Library -> Add to Library..Add To Libary window appears. » Click My folders and those of others that I can access. Click Advanced Options. Advanced options appear in the »...
Page 49
In the Media Sharing Service box, click Start Sharing. » A window appears, informing you that Media Sharing Service started. Click OK. Add folders for media sharing In TVersity, click the Sharing tab. Sharing options appear. » Click the green plus icon Options to add files and folders appear.
Add folders for media sharing In the Basic Setup box, click Sharing. » Sharing settings appear. Click Browse to add a folder location. Click Add new content directory to add more folders. When all folders are added, click Save changes then click Rescan content directories.
Press OK to confirm your choice. » The decoder is assigned. Use Philips EasyLink Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.
Page 52
(Standby-On) for at least 3 seconds for this to occur. Enable or disable EasyLink Note • Do not enable Philips EasyLink if you do not intend to use it. When watching TV, press » The home menu appears. Press the Navigation buttons to select [Setup].
Set TV speakers to EasyLink mode When enabled, this feature automatically turns off TV speakers when content from an EasyLink-compliant home theatre system is played. Audio is played only from the home theatre system’s speakers. When watching content from an EasyLink OPTIONS.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Supported display resolutions Computer formats • Resolution - refresh rate: • 640 x 480 - 60Hz • 800 x 600 - 60Hz •...
Ambient temperature: 5 to 35 degrees Celsius Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV.
EPG information 8 days EPG is only available in some countries Country 8 days EPG France Finland Sweden Denmark Norway Spain Germany Italy Greece Netherlands Czech Republic Belgium Austria Switzerland Estonia Lithuania Croatia Hungary Ireland Luxemburg Poland Portugal Russia Slovakia Slovenia Romania Serbia...
Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact Philips Consumer Care. You forgot the code to unlock the child lock feature • Enter ‘8888’.
• Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality. If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV. • If reception on only one channel is poor, fine tune this channel.
• Set the TV picture format to unscaled. Contact us If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/ support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in this user manual.
11 Index Ambilight change settings switch on or off analogue channel fine-tune audio balance audio language auto volume leveling bass batteries bracket Brightness cables quality CAM, see also Conditional Access Module 49 channel decoder channel grid access and change channels channels channel grid hide channels...
Page 74
factory settings favourite list create troubleshooting HDMI cable connectors troubleshooting headphone volume Home menu access remove devices install channels automatic manual Kensington lock language troubleshooting light sensor location lock Kensington menu home menu language setup menu teletext troubleshooting Mono/Stereo multimedia listen to music watch videos Multimedia...
Page 75
sound settings settings assistant setup menu sharpness shop mode sleep timer smart settings software update version sound settings standby troubleshooting subtitles language surround sound Table of Pages technical specifcations Teletext dual screen enlarge pages features menu search subpages table of pages teletext 2.5 timer sleeptimer...