Test Channel; Test Signalling - Kenwood TKR-750 Programming Reference Manual

You can modify the test and other configuration data by
KPG-91D.
Figure 7-3 "Test Mode" window
Note:
! The cooling Fan is switched On operates in PC Test Mode.
! Refer to the Service Manual for checking how to test.
7.3.1

Test Channel

It can select the channel to test. You can select the
numbers of the channel configured on the "Test
Frequency" window by the spin buttons.
Test Frequency Window.)
The frequency configured to the selected channel number
appears on the "Frequency" window.
Range 1 - 16
Default 1
Note: You cannot select the number of the channel that is not
configured on the "Test Frequency" window.
7.3.2

Test Signalling

It can select the test signalling. Select the number of the
test signalling that is already configured by the spin
buttons.
The Decode Tone/Encode Tone configured to the
selected signalling Number appears on the "Frequency"
window.
Range Test signalling No. 1 - 16
Default 1
signalling No.: signalling No. of the Test Mode
Decode Tone: Reception signalling
Encode Tone: Transmission signalling
Version: 1.01
signalling
*1: The value configured in the "Optional Features 2" tab.
Note:
(Refer to 6.13
Field Programming Reference (FPRG)
Table 7-1 Test Signalling
Decode tone
No.
1 None
2 None
3 QT 67.0 Hz
4 QT 151.4 Hz
5 QT 210.7 Hz
6 QT 250.3 Hz
7 DQT D023N
8 DQT D754I
9 None
10 None
11 DTMF 159D
12 None
13 None
14 None
15 None
16 -
6.4.2 Optional Features 2 Tab.)
TKR-750/850/751/851
deactivates AF Mute when the
signalling is decoded with the QT/DQT code and the
signalling matches.
7 PROGRAM MENU
Encode tone
None
100 Hz square wave
QT 67.0 Hz
QT 151.4 Hz
QT 210.7 Hz
QT 250.3 Hz
DQT D023N
DQT D754I
CW ID Encode [ID = VVV]
Single Tone [1000 Hz]
DTMF 159D
DTMF Tone 9
Courtesy Tone*1
Battery Warning Tone*1
Battery Operation Tone*1
-
(Refer to
61