Safety Instructions For Installation - Miele KM 5603 Operating And Installation Instructions

Safety instructions for installation


The appliance must only be installed and connected to the electricity supply
by a suitably qualified and competent person in strict accordance with current
national and local safety regulations.
Fit the wall units and rangehood before fitting the cooktop to avoid damaging
the cooktop.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material as well.

The cooktop must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.

When installing the cooktop, make sure that the mains connection
cable cannot come into contact with hot appliance parts.

The connection cable may not come into contact with any moving
kitchen component (e.g. a drawer) or be subject to mechanical
obstruction which could damage it.

Observe carefully the safety clearances listed on the following
pages.
All dimensions in this instruction booklet are given in mm.
50