Cobalt Digital Inc Cobalt Qube 2 User Manual page 58

Chapter 3
8. Once the Qube 2 shows up in the Network Neighborhood list,
double-click it to open it on your desktop computer. A password
prompt appears. Enter the user name and password used on the
Qube 2; the password is case-sensitive.
Click OK.
9. If you are using a workgroup name other than WORKGROUP, the
Qube 2 may not appear in Network Neighborhood immediately.
•
•
•
•
Setting up Windows file sharing for Windows NT
1. Double-click the Network Neighborhood icon. If you are using the
WORKGROUP domain or workgroup name, the Qube 2 (listed as
<hostname>) should be included in the list.
If the Qube 2 is not listed, double-click on the Entire Network icon
to have your computer scan the entire network for devices that can
be shared. Select WORKGROUP.
2. Once the Workgroup server list is visible, double-click the Qube 2
that you want to access. You can log into the Qube 2 as the
Qube 2 Administrator or as any one of the registered users.
3. You may see a password prompt (depending on how your computer
has been configured). If so, enter the user name and password used
on the Qube 2; the password is case-sensitive.
Click OK.
44
To view your current workgroup name, click Start in the
bottom left corner of the Windows screen.
Select Settings and then Control Panel. The Control Panel
window appears.
Select Network. The Network dialog appears.
Select the Identification tab. The computer name, workgroup
and computer description are displayed. Make note of the
workgroup name and return to Step 7.
Note: The Qube 2 Administrator can change the server
workgroup name through the Control Panel so that it matches
your Windows 95/98 workgroup name. See "Windows file
sharing (SMB)" on page 97.