Cobalt Digital Inc Cobalt Qube 2 User Manual page 110

Chapter 4
To change the FTP settings for your Qube 2:
1. On the Administrator Site screen, click Control Panel on the left.
The Service Settings table appears; the FTP server option is
checked on by default.
2. Click Parameters next to the FTP Server option. The FTP Settings
table appears. See Figure 31.
3. You can turn anonymous FTP on or off.
If you turn it on, you can indicate a size limit (in MB) for incoming
files; you can also limit the number of simultaneous users of the
anonymous FTP service.
4. Click Save Changes in the FTP Settings table.
5. Click Save Changes in the Service Settings table.
To download a file through anonymous FTP, log on to the site with the
user name "guest" or "anonymous". You can enter any password.
When you log on with one of these user names, you enter the directory
/home/groups/home/ftp/.
URL ftp://<IP address>/ .
The Qube 2 Administrator can post files here for downloading through
FTP client software or a Web browser.
To upload a file, you must use FTP client software (for example, Fetch
or WS-FTP) and access the directory
Once you have uploaded a file, you (as a guest) cannot see it or access it
on the FTP site. However, all registered site users with telnet/shell
privileges can access it.
The size limit specified for a file uploaded by FTP is the total amount of
disk space allocated for an FTP upload. If this disk space is set to zero,
guests cannot upload to the FTP site.
96
This directory can also be accessed by the
/home/ftp/incoming/
.