Advertisement
Step 4 : Install ActiveX Control
After logged on, you should see the following messages appear at the top of Internet Explorer, click on the message,
and click 'Install This Add-on for All Users On This Computer...'
When you see this message, click 'Install' to install required ActiveX control.
After the ActiveX control was installed, the first image will be displayed. You should be able to see the images captured from the camera in the
web page now. For advanced configuration and setting such as P/T tour, wireless connection, please refer to instructions given in the CD-ROM
user guide.
Step 5 : 【Option】Wireless Connection
You also can use the wireless function to connect the camera with the Wi-Fi AP. Go to the wireless configure page and click the "Available
Network" button, the wireless site survey page will displayed. Click the "Choose" button to connect the wireless AP. Then click "Apply" button
to save the configuration.
After save the configuration, reboot the camera and unplugged the RJ-45 cable, then the wireless connection will be established. For advanced
configuration and setting such as P/T tour, wireless connection, please refer to instructions given in the CD-ROM user guide.
Further Configuration
For detail configuration, please check user's manual on the bundled CD.
If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET di-rectly at the following email
address: support@planet.com.tw
Quick Guide
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518
Email: support@planet.com.tw
2011-AB5650-000
Fax: 886-2-2219-9528
www.planet.com.tw
their respective owners. Copyright © 2012 PLANET Technology Corp. All rights reserved.
ICA-HM227W
Advertisement
