Advertisement
Changing the door hinging
The appliance is supplied with right-
hand hinging. If left-hand hinging is
required, the hinges must be changed.
Please note that the hinging must not
be changed if this appliance is going to
be installed side by side with another
refrigeration appliance.
Danger of injury and damage
when changing the door hinging!
There is an increased danger of
injury and damage if the refrigeration
appliance is installed by a single
person.
Always change the door hinging with
the help of a second person.
If a door seal is damaged or has
come out of the groove, the door will
not close properly and cooling
performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
11210790-04
Remove the shelves/bottle shelf from
the appliance door.
Removing the top covers
Open the appliance door.
Slide off the right outer cover .
Remove cover from the door hinge
and cover from the soft-close
mechanism.
Installation
Advertisement
