Defrosting
If the frost is too thick, it will influence the refrigeration effect of freezer. When the frost thickness
reaches 6-8mm, it is necessary to conduct defrosting.
In button unlock state, press both "Fn" and "
display will show the controller temperature and "dF" alternately.
During defrost, the compressor stops working. ( Press any button or cut off the power, it will quit
"forecd defrost" mode).
To accelerate the process, place a bowl of water in the freezer to accelerate melting of the frost
If the frost is slightly thick or defrosting is slightly slow, use defrosting shovel
accompanied as an aid.
Do not use sharp objects for defrosting to avoid damage of the internal wall of
the freezer.
" for 3s, it will enter "forecd defrost" mode. The
17