Application Method - Haier HBD-116 Operation Manual

Application method

Description of temperature controller
Function button
Set button
: Power-on mark - indicates that the power is switched on
: Refrigerating mark - indicates that the refrigerating system is being operated
: Lock mark - indicates that the screen is locked
: Alarm mark - indicates that there is an alarm (be accompanied with buzzing alarm in normal
condition)
When there is a buzzing alarm, it can be canceled by pressing any button.
Unlock and lock
The temperature controller is equipped with lock function. The temperature is locked if it is not
operated for a long time, and "
press and hold "FN" and "SET" for 1 second. After that, "
indicates completion of the process. If lock is needed, simultaneously press and hold "FN" and
"SET" for 1 second to lock the temperature controller, after which "
If there is no button operation in 3 minutes, the temperature controller will be
locked automatically. Unlock again if operation is required.
Change the set temperature
The parameters are pre-set before leaving factory. Users do not need to adjust the temperature. If
there is special demand or the temperature in the box exceeds the scope, where the set
temperature needs to be adjusted, please refer to the following steps:
1.If the temperature controller is locked, please unlock it;
2.Current set value will be displayed on the screen after pressing "SET";
3.Increase or decrease the set value through "
4.Press "SET" again after changing to the expected value. The temperature controller will save the
current setting and exit to normal interface.
FN
SET
" on the screen will be light up. If unlock is needed, simultaneously
" or "
Up-regulation button
Down-regulation button
" on the screen will disappear, which
" on the screen will be light up.
";
13