Operation Using The Supplied Remote Commander; Turning On The Power; Pan/Tilt And Zoom Operation; Panning And Tilting - Sony BRC-300P Operating Instructions Manual

Operation Using the Supplied
Remote Commander
Before operating, check that the camera and peripheral
devices are properly installed and connected.
For details, see "Installation" (page 42) and
"Connections" (page 49).

Turning on the Power

to AC outlet
1
Connect the camera to an AC outlet using the
supplied AC power adaptor and power cord.
The power is turned on and the POWER lamp
lights.
The camera will automatically pan and tilt and be
reset to the position stored in POSITION 1 (Pan/tilt
reset action).
2
Turn on the peripheral devices.
To turn on/off the camera using the
Remote Commander
As long as the camera is connected to an AC outlet, you
can turn the camera on or off with the POWER switch
on the Remote Commander.
When you turn the power off using the Remote
Commander, the POWER lamp turns off and the
STANDBY lamp lights on the camera.
POWER
CAMERA SELECT
1 2 3
FOCUS
AUTO MANUAL
FAR NEAR
DATA SCREEN BACK LIGHT
POWER
POWER lights.
STANDBY lights.
Pan/Tilt and Zoom
Operation

Panning and Tilting

1
STD
HOME
L/R DIRECTION
SET
1
Press the POWER switch.
The camera will turn on and perform the pan/tilt
reset action automatically.
2
Press the arrow button to pan or tilt the camera.
While checking the picture on the screen, press the
desired arrow button.
To move the camera little by little, press the
button just for a moment.
To move the camera in a wide range, press and
hold the button.
To move the camera diagonally, press the V or v
button while holding down the B or b button.
To face the camera back to the front
Press the HOME button.
If you accidentally move the camera with
your hand
Press the PAN-TILT RESET button to perform the pan/
tilt reset action.
If the camera moves in a different
direction from that you intended
The camera is preset to face toward the right whenever
the b button is pressed. You might wish to face the
camera toward the opposite direction from that of the
button you pressed, for example, when you change the
direction of the camera while checking the picture on the
screen. In such a case, press the 2 (REV) button while
holding down the L/R DIRECTION SET button.
To reset the setting, press the 1 (STD) button while
holding down the L/R DIRECTION SET button.
Turning on the Power / Pan/Tilt and Zoom Operation
CAMERA SELECT
REV
2
PAN-TILT
RESET
31