Storing The Camera Settings In Memory - Presetting Feature - Sony BRC-300P Operating Instructions Manual

Storing the Camera
Settings in Memory
– Presetting Feature
Up to six combinations of settings (six positions)
including camera position, zooming, focusing, and
backlighting, can be preset.
For details of the camera settings to be preset, see
"Presetting Items" on page 62.
3
PRESET
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Adjust the position, zooming, focusing and
backlighting of the camera (pages 31 to 33).
3
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 6, in which you want
to store the settings.
DATA SCREEN
While holding down
The message "PRESET No.xx" (selected
POSITION number) is output from the composite
video output or S video output connector and is
displayed for about 2 seconds.
To recall the stored settings
Press any of the POSITION buttons, 1 to 6, in which you
have stored the settings.
34
Storing the Camera Settings in Memory – Presetting Feature
2
3
POSITION 1-6
RESET
1
2
BACK LIGHT
STD REV
1 2 3
Press a POSITION
4 5 6
button.
PRESET RESET
POSITION
To cancel the preset memory
While holding down the RESET button, press the
POSITION button from which you want to cancel the
settings.
DATA SCREEN
STD
1
4
PRESET
POSITION
While holding down
Notes
• When the power is turned on, the camera starts with
the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt positions
when the power is turned off and turned on again, store
those positions in POSITION 1.
• Storing or canceling the settings in POSITION 1 takes
about 2 seconds longer than those of other positions.
• When you are storing or canceling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
BACK LIGHT
REV
2 3
Press a POSITION
5 6
button.
RESET