5
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3
Align the screw holes on the bottom of the camera
with those in the ceiling bracket, and attach the
bracket to the camera.
Tighten the screws a little at a time in the numbered
order shown in the illustration. Attach the wire rope
using the screw designated as number 4. After all
of the screws have been temporarily tightened,
securely tighten each one in turn.
Ceiling
4
3M3 × 8
(supplied)
1
2
Note
For attaching the camera to the ceiling brackets, use only
the supplied screws. Using other screws may damage the
camera.
6
×
8).
Attach the wire
rope at the same
time.
3
Ceiling bracket (A)
7
Insert the protrusions on the ceiling bracket (A) into
the spaces prepared in the ceiling bracket (B), and
temporarily attach them by turning the ceiling
bracket (A) with the camera clockwise.
Ceiling
Ceiling
bracket (B)
Secure the ceiling brackets (A) and (B) using the
supplied three screws (3M3
Ceiling
3M3 x 8
(supplied)
Ceiling
bracket (A)
×
8).
45
Installation