Zooming - Sony BRC-300P Operating Instructions Manual

If the camera moves in a different
direction from that you intended
The camera is preset to face toward the right whenever
the joystick is inclined to the right. You might wish to
face the camera toward the opposite direction from that
in which you inclined the joystick, for example, when
you change the direction of the camera while checking
the picture on the screen. In such a case, press the
POSITION 2 (REV) button while holding down the L/R
DIRECTION button.
To reset the setting, press the POSITION 1 (STD) button
while holding down the L/R DIRECTION button.
Joystick Movement of the
camera
Incline to the right.
Incline to the right.
Note
The setting above only changes the signal emitted from
the RM-BR300 Remote Control Unit, and does not
change the setting of the camera itself.
If the STANDBY lamp of the camera
flashes
When the camera is moved or turned by hand or by
external shock, the microcomputer inside the camera
may not be able to memorize the pan/tilt position
properly.
To reset the pan/tilt position, press the PAN-TILT
RESET button.
STANDBY flashes.

Zooming

Turn the dial on the upper part of the joystick.
Subject appears farther
Note
When you perform pan/tilt operation while the camera is
Setting
in the telephoto mode, the moving speed of the image on
the screen may be a little jerky.
While holding down
L/R
DIRECTION
1
9
STD
Press.
While holding down
L/R
DIRECTION
2
10
REV
Press.
away. (Wide angle)
Pan/Tilt and Zoom Operation
Subject appears closer.
(Telephoto)
37