8 Care and maintenance
8.5
Replacing the seal pad
The seal pad 4 is located on the under-
side of the appliance lid.
▸ Take the damaged seal pad 4 out of
its holder 5.
▸ Insert the new seal pad 4 in the
holder 5 .
No aids or tools are needed.
8.6
System check
If the maintenance button
quired underpressure in the allotted time. The appliance lid may not be closed
properly or the appliance lid gasket may be dirty or damaged.
▸ Cleaning the lid gasket (see page 16). Do not use detergent!
▸ Close the appliance lid and press down.
If after the next vacuuming process the maintenance button
illuminated:
▸ Select a lower vacuuming level.
If the maintenance button
▸ Wait until the
▸ Dehumidify the vacuum pump (see page 18).
8.7
Dehumidifying
Dehumidification is necessary when the oil in the vacuum pump contains too much
water (from frequently vacuuming moist foodstuffs).
If the
and
buttons illuminate, ...
... the oil in the vacuum pump can be dehumidified.
▸ Close the appliance lid and press down.
▸ Touch the
button.
– The oil in the vacuum pump is being dehumidified.
If the
and
buttons illuminate, ...
... the oil in the vacuum pump must be dehumidified.
▸ Close the appliance lid and press down.
▸ Touch the
button.
– The oil in the vacuum pump is being dehumidified.
18
illuminates, the vacuum pump cannot achieve the re-
repeatedly illuminates:
symbol illuminates.
5
remains
4