Table of Contents
Advertisement
8 Care and maintenance
8
Care and maintenance
8.1
General notes
The drawer must be switched off for cleaning.
Incorrect handling can result in damage to the appliance!
▪ Do not use any abrasive cleaning agents, metal scrapers that are sharp or scratch,
steel wool, abrasive scouring pads, etc. to clean the appliance, as they will damage
the surface. Scratches to the glass lid can cause it to crack.
▪ Never use a high-pressure or steam cleaner to clean the appliance.
▪ Ensure no liquids or solids get into the suction inlet of the vacuum pump. This would
cause irreparable damage to the pump.
8.2
Cleaning
Outside
▸ Remove any soiling or excess cleaning agent immediately.
▸ Clean the surfaces with a soft cloth dampened with water and a little washing-up liquid
– for metallic surfaces rub in the direction of the original polish lines.
▸ Dry with a soft cloth.
Inside
▸ Remove the sealing bar 1 incl. sealing bar cover 2 from the appliance.
▸ Remove any soiling or excess cleaning agent immediately.
▸ Clean the surfaces with a soft cloth dampened with water and a little washing-up li-
quid – for metallic surfaces rub in the direction of the original polish lines.
▸ Dry with a soft cloth.
▸ Clean the sealing bar 1 with a soft cloth dampened with water and a little washing-up
liquid and dry with a soft cloth. The sealing bar cover 2 can be cleaned in the dish-
washer.
▸ Put the sealing bar cover 2 back in
place in the appliance.
▸ Position the sealing bar 1 on the two
locating pins in the appliance.
Appliance lid gasket
▸ Clean the appliance lid gasket with a soft cloth dampened with water.
Do not use detergent!
▸ Dry with a soft cloth.
16
1
2
Advertisement
Table of Contents
