Operation; Setup; Fill/Replace Bubble Fluid - Chauvet DJ Bubble King User Manual

4. O
PERATION

Setup

Fill/Replace
Bubble Fluid

Operation

Page 8 of 12
Install the sleeve to the front of the bubbler, using the 4 provided screws.
1. Place the Bubble King on a level surface and loosen the 4 thumb screws on either
side of the unit for fluid tank access.
2. Once the thumb screws are removed, lift the cover.
3. Fill the tank with bubble fluid. DO NOT FILL PAST TOP OF FLUID RESERVOIR.
Note: We recommend using CHAUVET bubble fluid (BJU or BJG) which has
been specially formulated for use with CHAUVET Bubble King products. The
tank capacity is 56 oz (1.7 l).
4. Lower the cover.
5. Reinsert and tighten the thumb screws.
1. Plug the Bubble King into a suitable wall outlet.
2. Turn on the Bubble King.
Screws x 4
Do not leave unused fluid in the reservoir for an extended period. The fluid may
thicken in the reservoir. Remove all fluid before packing or shipping.
Front
Thumb
Screws x4
B-550 Bubble King User Manual Rev. 6