Technical Information; Product Maintenance - Chauvet DJ Bubble King User Manual

5. T
ECHNICAL
Product
Maintenance
B-550 Bubble King User Manual Rev. 6
I
NFORMATION
Dust build-up reduces output performance and can cause overheating. This can lead to
reduction of the product's life and mechanical wear. To maintain optimum performance
and minimize wear, you should clean your products frequently. However, be aware that
usage and environmental conditions could be contributing factors to increase the
cleaning frequency.
After every 40 hours of continuous operation or when the machine will be idle for a long
time it is recommended to rinse the bubble wands and fluid tank with warm water to
prevent a build-up of residue which could reduce performance.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Loosen the 4 thumb screws on either side of the unit.
3. Lift the cover to reveal the fluid tank.
4. Empty all bubble fluid from the tank and replace with warm water.
5. Plug the product in and allow it to run as usual until all wands appear to be free of
residue.
Always dry the surfaces carefully after cleaning them.
DO NOT spin the fan using compressed air because you could damage it.
Page 9 of 12