Installing The Navilink; Installing On A Table; Installing With A Mounting Plate - Navien NaviLink User Manual

Installing the NaviLink

You can place the NaviLink on stable, flat surface, such as a table, or
install the NaviLink on a wall using the supplied mounting plate.
This device is designed for indoor use only. Please install and use this
device indoors.
Arrange the power, LAN, and NaviLink cables after connecting each
cable to a corresponding port to ensure a tidy work environment.

Installing on a table

1
Affix the supplied foam pads to the back of the NaviLink.
2
Connect the antenna to the NaviLink.
3
Place the NaviLink on the table.

Installing with a mounting plate

The NaviLink can be installed on a wall using the supplied mounting
plate.
1
Drill holes which fit the keyholes of the mounting plate into the
selected wall, and then insert the plastic anchors into the holes.
• Ensure the plastic anchors are inserted to their full depth in the
holes.
2
Place the flat side of the mounting plate against the wall and then
line up the keyholes with the plastic anchors.
• Ensure the mounting plate is placed on the wall correctly.
3
Insert the screws through the keyholes of the mounting plate and
into the plastic anchors, and screw them in a clockwise direction to
fasten the mounting plate onto the wall.
4
Connect the antenna to the NaviLink.
5
Clip the NaviLink onto the mounting plate with the antenna
pointing up.
• You can hear a click when the NaviLink is securely attached to the
mounting plate.
9