Navien NaviLink User Manual page 23

7
Select a router to connect the NaviLink to → enter the router's
password → tap OK.
• If the router to connect does not appear on the list, refresh the
router list.
• If the password has not been set, skip entering the password and
tap OK.
8
Enter the device information → tap Next.
• Make sure to select the current time to set the NaviLink time.
• NaviLink must be connected with the server properly in order to
proceed to the next step.
If you fail to proceed to the next step, check the router settings of
NaviLink or check the network status of the connected router.
23