Navien NaviLink User Manual page 21

2
Tap Product Owner Registration → Next.
To register an installer member, see Registering for Membership –
Installer/Servicer Member .
• Product Owner Registration: Select if you own the product.
To add a user to an already registered device, log in with the
Product Owner account, and add an Additional User from the
Member Management menu.
• Installer/Servicer Registration: Select if registering an installer
account. After registering an installer account, you can check
NaviLink information by registering an installer account to
NaviLink while logged in from the Product Owner account.
3
Change NaviLink to AP mode.
• Change to AP mode by holding the right button of NaviLink for at
least 3 seconds. The NaviLink APN (Access Point Name) is created
at random if you run the AP mode in NaviLink.
4
On your smartphone, tap Settings → Wi-Fi→ NlinkXXXX (e.g.:
Nlink1234) to complete the connection as NaviLink AP.
21