Pentair BERKELEY TMH Series Owner's/Operator's Manual page 12

16. Use shaft position tool M16670 to check shaft height.
• There should be between 0.100" and 0.125" lift
when assembled to the motor. With the shaft in the
full down position, use inspection tool M16670 to
check for proper lift.
• With the shaft in the full up position, there should
be a gap of approximately 0.100" between the shaft
position inspection tool and the pump shaft when
the tool is flush with the bracket.
17. Use shaft rotation tool M16822 to check that pump
rotates freely.
18. Assemble coupling M15872 and coupling guard
M15874
• Apply 3M Scotch-Weld™ 2141 to permanently
®
bond components or use B87051 coupling
assembly.
3M and Scotch-Weld™ are registered trademarks of 3M Company.
®
0.100" to 0.125
7043 0316
12