Using The Channel Setup Menu - Sony WEGA KV 20FA210 Operating Instructions Manual

Operating Instructions
Using the Channel Setup
To access the Channel Setup menu, use the following steps:
To Display To Highlight
f
Press to highlight an option; then press
Favorite 1
Channels
Quick access
2
to favorite
channels
3
4
✍
To use Favorite Channels, exit all menus and press
desired channel number and press
Cable Use the
On:
Off:
✍
After changing your cable settings, you will need to perform Auto Program. See "To perform Auto
Program again" on page 19.
Channel Fix Use the
Off:
2-6:
Video 1:
✍
You cannot use Favorite Channels, Cable, Channel Skip/Add, or Channel Label when Channel Fix is set.
28
To Select
F f
Use the or buttons to highlight the position (1-8) where you want
to set a favorite channel, then press
F f
Use the or buttons to find the channel you want to add to your
favorite channels.
Press to select the channel. The TV will automatically change to
the selected channel.
G
Press to return to the Channel Setup menu or press
.
F f
or buttons to highlight one of the following options, then press
to select it.
Select if you are receiving cable channels with a CATV cable.
Select if you are using a TV antenna.
F f
or buttons to highlight one of the following options, then press
to select it.
Channel Fix is not set.
Select when you want to control all channel selection through
a cable box or VCR. Select the appropriate channel (usually 3
or 4) and use the cable box's or VCR's remote control for
channel selection.
Select from available video inputs when you have connected
video equipment (e.g., a satellite receiver) and you want your
TV fixed to it.
Menu
Channel Setup
Favorite Channels
Cable : On
Channel Fix :
Auto Program
Channel Skip/Add
Channel Label
.
Move
.
F f
. Press or to move the cursor to the
Off
Select End
to exit.