Dynamic Bass System Connection (Subwoofer)
•
Make sure to disconnect the TV before connecting the Dynamic Bass Response System.
•
Only the supplied Dynamic Bass Response System unit should be connected to the KV-
20FA210 Sony TV inputs (SUBWOOFER +/-).
1
Introduce the support pin of the Dynamic Bass Response System into the guide located on
top of the TV.
2
Connect the Dynamic Bass Response System cables to the indicated inputs of the TV rear
panel. Connect the gray cable to the SUBWOOFER
cable to the SUBWOOFER
3
Once installation is complete, plug the TV's AC power cord into the wall socket.
✍
Do not plug in the AC power cord until the subwoofer is completely installed.
(black input). See illustration below.
AUDIO
Subwoofer + (gray)
Dynamic Bass Response System
Pin
Guide
(gray input). Connect the black
1
3
AUDIO
Subwoofer - (black)
Connecting Your TV
11