Sony WEGA KV 20FA210 Operating Instructions Manual page 25

Connecting a DVD Player
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player
to AUDIO/VIDEO IN on your TV.
Rear of DVD Player
Optional connection
❏
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
❏
If your DVD player is equipped with component video outputs (Y, P
improve the picture quality by using component video cables (480i only).
Rear of DVD Player
1
2
1
Using component video cables (not supplied), connect the Y, P
player to Y, P , P
B R
2
Connect AUDIO OUT on your DVD player to AUDIO IN on your TV.
✍
The Y, P , P outputs on your DVD player are sometimes labeled Y, C
B R
connect the cables to like colors.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your DVD (see page 5).
❏
To activate your remote, press
❏
Press repeatedly to switch to the DVD player's input (VIDEO input).
P (red)
R
P (blue)
B
Y (green)
IN on your TV.
to operate your DVD.
Connecting Your TV
1 3
AUDIO
AUDIO
Video (yellow)
Audio L (white)
Audio R (red)
, P
B
1 3
AUDIO UDIO
AUDIO UDIO
Audio L (white)
Audio R (red)
, P OUT on your DVD
B R
, and C or Y, B-Y, and R-Y. If so,
B R
Rear of TV
), you can
R
Rear of TV
17