Sony WEGA KV 20FA210 Operating Instructions Manual page 23

Connecting a TV and Satellite Receiver
Satellite receiver
1
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your satellite receiver (see page 5).
❏
To activate your remote, press
to operate other functions.
❏
Press repeatedly to switch to satellite receiver input (VIDEO input).
From
cable/
antenna
2
3
to operate your satellite receiver. See page 7 on how
Connecting Your TV
Rear of TV
1 3
AUDIO UDIO
AUDIO UDIO
Video (yellow)
Audio L (white)
Audio R (red)
15