Using The Timer Menu - Sony WEGA KD 32FS130 Operating Instructions Manual

Using the Timer
To access the Timer menu, use the following steps:
To Display To Highlight
Timer functions apply to analog channels only. You cannot set the Timer for
Timer 1
Timer 2 digital channels.
Scheduled
viewing
Use the timers to program your TV to turn on and off by day, time,
duration, and channel. The timer duration is a maximum of six hours.
When the channel is fixed, it is not necessary to set the channel.
1
2
3
✍
Select Off to turn off the Timer. Your previous settings will be saved.
Set your TV to the current day and time. Press
Current Time
Time menu:
1
2
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
Menu
To Select
F f
Use the or buttons to highlight Timer 1 or Timer 2, then press
.
F f
Use the or buttons to enter the desired day, start time, duration,
and channel, then press
Timer has been set, and the timer light on the front panel of the TV
should be on.
Press EXIT to exit the menu.
F f
Use the or buttons to enter the correct day and time, then press
.
Press EXIT to exit the menu.
Timer
T i m e r 1 : S e t
T i m e r 2 : S e t
C u r r e n t T i m e
Move Select
. The timer status should be On when the
to open the Current
End
49