Using The Timer @ Menu - Sony Trinitron WEGA KV-27FS12 Operating Instructions Manual

Using the Menus
Using the Timer @ Menu
To access the Timer menu, see "To access a menu" on page 21.
Audio Channet Parent §
© Es Re
Timer 1: Set
Timer 2: Set
Current Time
Daylight Saving: OFF
—--:--AM
Move MUBE Select End
Timer 1 and With the menu open, set cursor on Timer 1 or Timer 2:
Timer 2 1 Press > or @, then press > or @ again.
Scheduled 2 Press ¢ or & until the desired day or range of days is
viewing
displayed, then press > or @.
3 Press ¢ or © to select the hour you want the TV to turn
on, then press > or @.
4 Press ¢ or & to select the minute you want the TV to turn
on, then press > or @.
5 Press ¢ or % to set the duration, up to 6 hours, then press
>or@.
6 Press ¢ or % to set the channel and press > or @.
) You must set the Current Time before you can use Timer 1 and Timer 2.
2 You can set the Timer to ON, OFF, or Set. Once the timer is set, you can turn it
on or off without having to go through the settings.
Current With the menu open:
Time 1 Press? or @.
2 Press ¢ or © to select the day and press > or @.
3 Press ¢ or % until the current hour is displayed, then
press > or @.
4 Press ¢ or & until the current minute is displayed, then
press > or @.
Daylight OFF: Select in fall at the end of Daylight Saving.
Saving ON: Select in spring to compensate for Daylight Saving.
@) When you perform Auto Program, all Timer 1 and Timer 2 settings will be
cleared.
&) Any loss of power will cause Current Time, Timer 1, and Timer 2 settings to
be cleared.
33