Using The Timer Menu - Sony FD Trinitron WEGA KV-32HV600 Operating Instructions Manual

Using the Timer Menu
To select the Timer Menu
1 Press
MENU.
2 Move the joystick ÷ or ÷ to
highlight the Timer icon and
press O"
To reset the Cbck or Timers
Press RES}Ton the remote
control, when in the Timer
Menu, to reset to the factory defaults.
•_,,_==iul=l_,,_==,_=_,,_, I
Selecting Timer
Op tio n s
_To go directlyto
programmingTimer1 or 2,
press0 insteadof moving
the joystick÷.
_To return to the Timer
Menuafter programmingone
of the Timers, p ress_ when
the highlight is inthe channel
numberfield.
3 The Timer Menu includes the following options:
Timer 1 You can use the Timers to program the TV to turn on and
Timer 2 off and tune to a specific channel at two scheduled
viewing times.
Timer 1 and Timer 2 are not available to be set until you set
the Current Time.
1 Move the joystick ¢ or _ to highlight Timer 1 or
Timer 2. To set the timer, move the joystick ÷.
2 Move the joystick _ or _ to highlight one of the
following options, then press @.
Progra_r Select to set the Timer by day; time,
duration, and channel.
Off Select to turn off the Timer. (Your previous
settings are saved.)
If you selected Progra_r in step 2, move the joystick _*
and _ to set the day(s), hour, minute, duration, and
channel number. Press @ (or move the joystick ÷) to
confirm each setting and move to the next setting.
Move the joystick ÷ to go back to the previous
setting.
4 Press MENUto exit the Menu. An LED on the front
panel will light, indicating the timer has been set.
Current Tree 1
Press _
to select CurrentTime.
2 Move the joystick _ and _ to set the current time
(day, hour, and minute). Press @ (or move the
joystick ÷) to confirm each setting and move to the
next setting. Move the joystick ÷ to go back to the
previous setting.
Press MFNU to exit the Menu.
73