Utilities; Safety Cautions - Cannon CCS-2100 Instruction & Operation Manual

4

Utilities

AC power input
Grounding

Safety cautions

General Caution
The customer must be able to provide the appropriate power and ground-
ing for the CCS.
Specifications of the voltage and frequency of the AC power source for
the CCS are provided by the customer when placing an order. If you have
any questions regarding the correct voltage for your CCS model, call
CANNON
CAUTION
Only attach the power cord from the rear of the CCS Series II Controller
to an AC mains with the power requirements specified on the label on
the rear of the Controller.
It is very important that the power source for the CCS has an electrical
ground. The CCS is equipped with an IEC 320 socket which must be
plugged into a grounded outlet.
Please observe the following safety procedures and notices for proper
operation of the CCS:
Make sure that your unit is operated only by qualified personnel.
Make sure that you read and understand all operating instructions
and safety precautions listed in this manual before installing or
operating your unit. If you have questions regarding instrument
operation or documentation, contact CANNON
Do not deviate from the installation, operation or maintenance
procedures described in this manual. Improper use of the CCS
instrument may result in a hazardous situation and may void the
manufacturer's warranty.
Handle and transport the unit with care. Sudden jolts or impacts may
cause damage to components.
Observe all warning labels.
Never remove warning labels.
Never operate damaged or leaking equipment.
Unless procedures specify otherwise, always turn off the unit and
disconnect the mains cable from the power source before performing
service or maintenance procedures, or before moving the unit.
Never operate the equipment with damaged mains power cables.
Refer all service and repairs to qualified personnel.
In addition to the cautionary statements listed previously, additional
cautions may be posted throughout this manual. These cautions, identi-
fied by the caution symbol (see left) indicate important operational
procedures. Read and follow these important instructions. Failure to
observe these instructions may void warranties, compromise operator
safety, and/or result in damage to the CCS unit.
® CCS-2100 with VISCPRO
CANNON
Version 2.0a — November, 2010; CANNON
2139 High Tech Road • State College, PA 16803 • USA
®
for assistance.
® Instruction & Operation Manual
® Instrument Company
®
Instrument Company.