Advertisement
Manual drive
with a brake mounted on the upper
beam of the extractor. Makes it possible to
operate the device when the access to electricity
is impossible. Manual drive casing is made of
powder-coated metal. Steel rolled gears transfer
the torque to the basket axis.
Lid
Transparent lid made of metaplex, thickness 3
mm, protects a user against the hazard of coming
into contact with a spinning basket and getting
dirty .
plastic, 6/4"
Drain valve-
• Drum height (without drive)-610mm.
• Drum height, without drive, with legs-
950mm.
• Extractor weight – 24.5 kg d= 600mm
• Extractor weight –21 kg d=
•
Legs and beam powder-coated
Components of the Minima-
series extractor with manual
drive
•
Drum with engine mounted
•
Assembling elements (list below)
•
lid 2 pcs
•
plastic valve
•
extractor's legs
•
manual
•
guarantee
List of assembling elements:
Fixing the legs
a. knob to fix the legs - 6 pcs.
b. extractor's legs – 3 pcs
Fixing the handle
e. handle - 1 piece
500 mm
Allen
bolt
d.
M8x110 - 1 piece
f.cap nut M8 - 1 piece
Wrench 10/13 – 1 piece
Allen wrench 6 – 1 piece
Fixing the lid:
g. front lid made of Plexiglas with five orifices - 1
g1. Rear lid made of Plexiglas with four orifices –
1 piece.
h. bolt to screw up the handle to
plexiglas – 1 piece
j. lid hinge – 4 pcs
k. plastic washers – 8 pcs
piece
i. grip to lift the extractor
lid – 1 piece
Advertisement
