Advertisement
• Drum height with the drive, with legs-
950mm.
• Honey extractor's weight – 24.5 kg
diameter 600mm
• Honey extractor's weight – 21 kg
diameter
500 mm
•
Legs and beam ate powder-coated
Components of the honey extractor
with electric drive:
•
Drum with the engine installed
•
Assembling elements (list below)
•
Lid (2 pcs).
•
Plastic valve (c)
•
MDD controlling
•
Honey extractor's legs (b)
•
Manual
•
Guarantee
The list of assembling elements:
Leg fixing:
a. leg fixing knob - 6 spcs
b. legs – 3 pcs
Lid fixing:
d.
Upper lid made of Plexiglas with five
orifices - 1 pc
d1. Rear lid made of
Plexiglas with four orifices - 1 piece
e. bolt to screw the handle – 1 piece
f. handle to lift the lid – 1 piece
g. lid hinge – 4 pcs
h. plastic washers – 8 pcs
conical Allen screw 5x25 – 8 pcs.
i1. Conical Allen screw
M5x30 – 8 pcs.
j. washer extended to hold the nuts
for
Plexiglas – 8 pcs
j1. washer 5 for beam nuts 8 pcs.
k. nut for conical Allen bolts for
Plexiglas and beam M5 – 16 pcs
wrench 8/10 – 1 pc
Allen wrench 3 – 1 pc.
Controller fixing:
I. honey extractor's control unit
I1. Cap nut M8 – 2 pcs
Advertisement
