Advertisement
I2. washer 8 – 2 pcs.
I3. bolt M8x25 – 2 pcs
Wrench 10/13 – 2 pcs
Assembling the MINIMA-series honey
extractor with electric drive
1.
Take the drum with installed engine out of
the carton box
2.
Take out the elements for self-assembling
3.
Assemble the legs and the valve
4.
assemble the Plexiglas
5.
assemble the controlling unit
Fixing the controlling unit
a.
Fixing the valve
b.
Fixing the legs
Screwing the hinges to the beam
Knob folding to the plexiglass
3.2. Technical parameters of the
manual honey extractor
Drum of the extractor is made of stainless and
acid-resistant steel plate, thickness 0.6 mm.
The proper arrangement of the rabbets
reinforces the drum construction even more.
Basket design
Diagonal basket made of stainless and acid-
resistant rods, thickness 2 and 5 mm, arranged in
the way protecting the frames from honeycombs
breaking out during spinning. Meshing size 20x20
mm. The basket placed on the sliding-retaining
sleeve.
Advertisement
