Table of Contents
Advertisement
8.3 Error messages
Message on the display
2019-02 EN 5020070.00A.04
Cause
Embroidery module has to be
removed.
The embroidery module has to be
attached.
The bobbin winder is activated.
The thread indicator is
deactivated.
The main motor isn't running.
The upper thread is used up.
The upper thread has broken.
Repair
> Push the release button and pull the embroidery module
carefully to the left.
> Carefully slide the module from left to right into the
module connection of the machine.
> Deactivate the bobbin winder.
> To activate both indicators, touch the icon «Confirm».
> To keep the indicators deactivated, touch the icon
«Cancel».
> Turn the handwheel clockwise until the needle is at its
top position.
> Remove the stitch plate.
> Remove the thread remnants.
> Clean the hook.
> Remove the hook and make sure that there are no
pieces of broken needle points on the magnetic back of
the hook.
> Insert a new spool.
> Rethread.
> Rethread.
Attachment
73
Advertisement
Table of Contents
