Steps
1
Connect the coin-cell battery to the coin-cell battery cable.
2
Adhere the coin-cell battery into its slot on the palm-rest assembly.
3
Adhere the tapes securing the coin-cell battery cable to the right I/O-board and palm-rest assembly.
4
Connect the coin-cell battery cable to the connector on the system board.
Next steps
1
Install the battery.
2
Install the
2230 solid-state
3
Install the
2280 solid-state
4
Install the
base
cover.
5
Follow the procedure in
Keyboard-controller board
drive. (if applicable)
drive. (if applicable)
After working inside your
computer.
29