Dell Alienware m15 R2 Service Manual page 64

Advanced
Intel(R) Software Guard Extensions allocated memory
size
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
SupportAssist System Resolution
Auto OS Recovery Threshold
SupportAssist OS Recovery
Intel(R) Rapid Storage Technology
Non-RAID Physical Disks
Table 7. System setup options—Security menu
Security
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Admin Password
System Password
HDD password
Password Change
Computrace
Firmware TPM
PPI Bypass for Clear Command
64
Default: Software Controlled
Displays the allocated memory size for Intel Software Guard
Extensions.
Enable the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard
drive
Default: Enabled
Enable or disable BIOS Auto-Recovery.
Default: Disabled
Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
Default: 2
Enable or disable SupportAssist OS recovery.
Default: Enabled
Displays the disk using the Intel(R) Rapid Storage
Technology.
Displays if the setup status is unlocked.
Displays if the administrator password is clear or set.
Default: Not set
Displays if the system password is clear or set.
Default: Not set
Displays if the HDD password is clear or set.
Default: Not set
Enables you to set the administrator password. The
administrator password controls access to the system setup
utility.
Enables you to set the system password. The system
password controls access to the computer at boot.
Enables you to set, change or delete the hard-disk drive
password.
Enables you to permit or deny system password or HDD
password changes.
Default: Permitted
Enable or disable the BIOS module interface of the
optional Computrace Service from Absolute Software.
Default: Activate
Enables you to enable or disable the firmware TPM
function.
Default: Enabled
Enables you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip